Hi and welcome! Today I have two tags to share for the May’s Christmas Craft Creations challenge. The theme is Tags Or ATC and you can find all the details here.
I used the Lawn Fawn’s Plaid stencil and Distress inks to create the background piece and then cut it in half and used a tag punch. The two snowmen were from my stash, just colored them so that they match the plaid. I stamped and heat embossed snowflakes on the backgrounds and also added die cut snowflake behind each snowman. I also added some sparkle and these are my finished tags:
Thank you for stopping by! I hope you’ll join us in the challenge 🙂
Hi and welcome! It’s again time for the Squirrels Gone Nuts hop! The theme for April is Florals and Watercolors (we always have a theme and randomly selected supply or technique). If you have arrived here from the sweet Karen, it means that you are on the right track.
For my background I decided to use a watercolor spray that I’ve had for a long time and never used. It was a freebie with an order and the color is…. well, not something that I like much. I took a piece of watercolor paper, spayed a bit of water and then used the spray. Sprayed a bit more water and placed a stencil on top. Left all to dry overnight and this was the result:
I won’t lie that it wasn’t easy to decide what to do next. After two weeks of staring at this piece (and running out of time) I decided to go with heat embossed in white florals on vellum. I used Studio Katia’s Spring Bouquet stamp set and die three times. Arranged the die cuts around the sides of the card panel, cut the excess off and added it to another part. To finish off the card I cut a frame in Lime pearlescent cardstock (I didn’t want to go with black or white). Added a sentiment and white matte gems.
That’s all from me. I hope you’ll hop along! Your next stop is the lovely Anna 🙂
Hi and welcome! Today I’m sharing my DT card for Christmas Craft Creations challenge for the month of March. The theme is Christmas Flowers and you can see the details here.
I used the Christmas Rose Bouquet stamp set by Wplus9 and colored it with Copic markers and fussy cut it out. I used embossing folder by We R memory keepers from the Basic Stripes set and lightly ink blended distress ink in brushed corduroy. I added a frame popped on foam tape and also a sentiment from Lawn Fawn set. I also added some splatters and Nuvo Crystal drops in Caramel Latte.
Hi and welcome! It’s again time for the Squirrels Gone Nuts hop and this is my most favorite time of the month! The theme for March is Green with Special Cardstock (we always have a theme and randomly selected supply or technique). If you have arrived here from the wonderful Anna, it means that you are on the right track.
I knew right away that I’ll be making a Spring card and I had the perfect stamp set Finally Spring by Create a Smile (bought it in December but never used). I loved seeing the snowdrops in my Grandma’s garden as a kid and I knew that soon Spring comes.
I stamped the images on newish to me paper Claire Fontaine DCP with Lawn Fawn Jet Black ink. I used YG17 and YG03 Copic markers for the green parts and BV00, C1 and C0 for the petals. Also BG000 to outline all. I fussy cut the images out. For background I used Craft Perfect handcrafted paper called Geometric Galaxy. For a bit more interest I cut twice a frame out of white cardstock. Dies are from Tonic Craft kit 14 and if you still haven’t figured it out, I try to use dies from these kits every month 🙂 . I stamped and heat embossed in clear my sentiment onto a tag from another Tonic Craft kit, I believe it was number 32. I used leftover piece of white/green twine to attach the tag to the frame. I added foam squares behind the top parts of the snowdrops for a bit more dimension.
Once I had all adhered onto a white cardbase, I added a light green sequin on the knot of the twine and filled it in with Nuvo Crystal Glaze. Lastly, added clear Wink of Stella.
This month I have also a video:
Please, head over to the sweet V’s blog. I hope you’ll enjoy the hop 🙂
Hi and welcome! Today I’m sharing my card for the February’s Christmas Craft Creations challenge. The theme is Blue and Silver and you can see more details here.
I made a simple ink blended background: chipped sapphire and blueprint sketch Distress inks. Once my panel was completely dry, I stamped and heat embossed in silver the ornament from “Baubles” stamp set by Pink Ink Designs. Then I used Nuvo Glitter pens in silver and blue to color few parts of the image. I slightly trimmed the panel on both long sides and adhered it flat onto a dark blue card panel, and then onto my card base. I added the sentiment “Merry Christmas” in silver popped on foam squares and also added few silver confetti.
Thank you so much for stopping by! Please, check what the other amazing design team members made and leave them some lovely comments 🙂 I hope you’ll play along!
Hello and welcome! This is our second instalment of the Squirrels Gone Nuts year-long hop. Theme for February is Friendship with a Shaker and you should have arrived here from the amazing V.
I always connect Friendship with Flowers so a floral stamp was a must. I picked Waffle Flower’s Bouquet Builder 3 (barely used). I remember receiving it two years ago on my birthday and there was a sweet note from the shop owner; that really made my day. I even found already stamped images in my scrap box. Not so perfectly stamped on few places but that wasn’t bothering me. So at this point I had to decide how to make the shaker. Originally, I wanted to use a shaker window (never used before) but it simply wouldn’t work. So I looked through my Tonic Craft kits (rarely used) and in kit 13 there was the perfect die to create the window. Picture of the used supplies below. The sequin mix was in the same order as the stamp set 🙂
I die cut two panels with the stitched rectangle die (size A6). On the first one I marked on all four sides 1.5 cm from the stitching and made guide lines with a pencil. I also marked the centre of the panel and also the die I was going to use. Then I lined it up as shown on the picture and ran it through my die cutting machine. After that, I aligned the die with the top pencil line and again cut it out. Now my shaker window was ready.
I used my Copic markers to color the florals and I tried to use colors as close as possible to the colors of my sequin mix.
On my second panel I ink blended Distress inks in Scattered Straw, Worn Lipstick and Seedless Preserves. It was time to assemble the shaker.
I managed to hide those not so perfect places with aditional images and the sentiments from SSS – Tiny Words stamp set. Added Wink of Stella in clear on all of the flowers and that was it.
Hello and welcome! Today I’m sharing my card for the January’s Christmas Craft Creations challenge. The theme is “Ribbon or Twine” and you can see the details on how to enter here. You have time till February 9th.
For my card I used supplies from my stash: already colored and die cut unicorn from Lawn Fawn’s stamp set and a dry embossed with stencil piece of cardstock (I am taking part in V’s Just Stash January challenge).
I stamped and die cut scarf and lots of gifts, then colored them with Copic markers and added details with sparkly gel pen. I used Distress inks to add color to the dry embossed panel. Lastly, I created “patterend paper” by stamping snowflake with rainbow colors around the edges of my card panel. I also stamped small snowflakes all around with gold Delicata ink and did a little bit of ink blending on the raised snowflakes.
To put the card together, first I wrapped twine around the dry embossed piece, then popped it on foam squares over a slightly larger mirrored card piece and then adhered all onto the rainbow snowflake panel (adhered onto my card base). Then I added the images, some on foam squares, some adhered flat. Added the sentiment and a bow out of the twine. Added few gold sequins and that was it.
Here is a video showing my process:
Please, visit the challenge blog for more inspiration from the talented design team members 🙂
Hello, crafty Friends! Welcome to the Squirrels Gone Nutz: a whole year-long hop! I’m so excited to be joining the Squirrel Sisters (Anna, Karen, Marie and V. who formed the Squirrel Squad at the Collected Crafty Collabs hops if you remember) and two other lovely Squirrels: Lounon and Tasha 🙂 . In this fun collab we’ll be using again supplies from our stash (let’s be honest, we all hoard craft supplies… or forget to use… ). The theme for January is “New (Year, Baby and so on) with Leftovers (optional)” and you should have came here from the sweet and creative Lounon.
I went through my stash of backgrounds and scraps and I found few colored leftovers from the Simon Says Stamp – “Pretty Peonies” background stamp. I’m sorry, I didn’t even think of taking a picture… but I have a quick video and all is shown in there. Only one looked good enough to me, made with Nuvo shimmer powders, the other two pieces needed some more color to the background or to the florals. The next treasure that I found was a card front sized white (with gold shimmer) pearlecent cardstock that I thought will match the brass heat embossing on the peonies from that scrap piece. It took me some time to figure out the card design but I decided to use a die from Tonic Craft kit 18 and sentiments from Tonic Studios – “Summer Flowers” stamp set: “Wishing you another year full of happiness and love” and “Happy Birthday” for the inside. Golden metallic cardstock strips helped me cover up my not so straight die cutting 😀 I glued all the pieces together and that’s it.
Here is my video:
Oh and I am taking part in V.’s challenge called Just Stash January. More info here.
Hello and happy New Year! I am so excited to start 2021 with a challenge.. or two 🙂
After the holidays I didn’t know what to make so I asked my family to help me out by choosing a stamp set. They not only did that but also gave me a note with details on what my card should be. This was so much fun so we decided to turn it into series 🙂
In Episode 1 I share how I made Glowing Galaxy Infinity Shaker card following the instructions my husband and daughter gave. Here I’m showing just the finished card but you can see the whole process in my video (also how it glows in the dark).